55V Gigabit 95W Single Port Power over Ethernet PoE Injector
JKW-100095AT high power PoE midspan is a power supply and data transmission for Ethernet. With output 55VDC, 95W, it could meet requests of high power BS, wireless AP, IP camera, high power equipment, etc. In addition, it is compliant to IEEE802.3af/at PD and it is small size, high power, easy to install
POE (Power Over Ethernet) refers to the existing Ethernet cabling infrastructure Cat.5 do not make any alteration of the circumstances, for a number of IP-based terminals (such as IP telephones, wireless LAN access point AP , network cameras, etc.) to transmit data signals at the same time, but also for the provision of DC power supply such equipment technology. POE technology to ensure the safety of the existing structured cabling at the same time to ensure the normal operation of the existing network, minimizing costs.
POE is also known as the power supply system based on local area network (POL, Power over LAN) or Active Ethernet (Active Ethernet), sometimes referred to as Power over Ethernet, which is using the existing transmission standard Ethernet cable At the same time, the transmission of data and electrical power of the latest standards, and maintained with the existing Ethernet system and user compatibility. IEEE 802.3af Power over Ethernet standard is based on the new standard for POE system, which based on the IEEE 802.3 an increase of direct power supply cable through the relevant standards, is an extension of the existing Ethernet standards, is the first of a international standards for power distribution.
Every power supply has passed strict test before delivery,the whole test need about 8 hours:
Technical Parameter
|
Technical Parameter |
|
Transmission Rate |
10/100/1000Mbps |
|
PoE Pin |
4/5(+), 7/8(-) and 1/2(-), 3/6(+) |
|
Input Current |
1.5A@100-240V |
|
Output Power |
95W |
|
Output |
55V/1.72A |
|
Standard |
IEEE802.3af terminal |
|
IEEE802.3at terminal |
|
RoHS Compliant |
|
WEEE Compliant |
|
CE |
|
EME |
FCC Part15, ClassB |
|
EN 55022, ClassB |
|
Certification |
CE, FCC |
|
AC Surge Protection |
1.5KA(8/20μS), 3KV(1.2/50μs) |
|
Reliability |
MTBF: 100,000h, @25°c |
|
Dimension |
202mm*128mm*41mm |
|
Weight |
760g |
|
LED Indicator |
Green Load Activated Light |
|
Physical Interface |
PoE RJ45 |
|
LAN RJ45 |
|
AC Port Three Pin AC Power
|
|
Working Temperature |
-5°c to 45°c |
|
Height |
-304.8m to 304.8m |
|
Working Humidity |
MAX to 90%, No Condensation |
Full Features
♦ Indoor deployment PoE Injector
♦ High power 95W
♦ Metal enclosure
♦ Compliant with IEEE802.3af, IEEE802.3at
♦ OVP, OCP, UVP, thermal-shutdown protection, output overloads protection, output short cricuit protection
|
|
55V Gigabit 95W Single Port Power over Ethernet PoE Injector Images
|
